search

Dot-x SERIES Spezifikationen Seite 62

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 69
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
    •
  • LESEZEICHEN
    • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 61
DOTX-45 Dissolved Oxygen System Part 10– Troubleshooting
DOTX-45 61 -
MESSAGE
DESCRIPTION
POSSIBLE
CORRECTION
Max is 200
Entry failed, maximum user value allowed is 200.
Reduce value to ≤ 200
Min is 200
Entry failed, minimum value allowed is 200.
Increase value to ≥ 200
Cal Unstable
Calibration problem, data too unstable to
calibrate. Icons will
not stop flashing if data is too
unstable. User can bypass by pressing ENTER.
Clean sensor, get fresh cal solutions, allow
temperature and conductivity readings to fully
stabilize, do not handle sensor or cable during
calibration.
Out of Range
Input val
ue is outside selected range of the
specific list item being configured.
Check manual for limits of the function to be
configured.
Locked!
Transmitter security setting is locked.
Enter security code to allow modifications to
settings.
Unlocked!
Transmitter security has just been unlocked.
Displayed just after security code has been
entered.
Offset High
The sensor zero offset point is out of the
acceptable range of -40 to +40 mV.
Check wiring connections to sensor. Allow
sensor to operate powered a m
inimum of 12
hours prior to first zero cal.
Sensor High
The raw signal from the sensor is too high and
out of instrument range.
Check wiring connections to sensor.
Sensor Low
The raw signal from the sensor is too low.
Check wiring connections to sensor.
D.O. High
The oxygen reading is greater than the maximum
of the User-selected range.
The oxygen reading is over operating limits.
Set measuring range to the next highest level.
Temp High
The temperature reading is > 55ºC.
The temperature reading is
over operating
limits. Check wiring and expected temp level.
Perform RTD test as described in sensor
manual. Recalibrate sensor temperature
element if necessary.
Temp Low
The temperature reading is < -10 ºC
Same as “Temp High” above.
TC Error
TC may be open or shorted.
Check sensor wiring and perform RTD test as
described in sensor manual. Check j-
box
connections.
Figure 10-1 Display Messages
Seitenansicht 61
1 2 ... 57 58 59 60 61 62 63 64 65 66 67 68 69

Kommentare zu diesen Handbüchern

Keine Kommentare
Verwandte Produkte und Handbücher für Fernbedienungen Dot-x SERIES
Fernbedienungen Dot-x DNR V SERIES Bedienungsanleitung   (12 Seiten)
Fernbedienungen Dot-x SERIES Bedienungsanleitung   (12 Seiten)
  • Hall-research M&A Technology Chef'sChoice Mobile Stream Neuspeed
  • Bosch Herde Magellan Docking-Lautsprecher SMC Networks Brücken & Repeater Mantis Holzspalter Agilent Technologies Messen, Testen & Steuern
  • IKEA HD LN00 60S Traxxas 56076-1 Electrolux EN93489MW Ceiva LF4008 Atlona AT-PA100
  • Oregon Scientific RAS200 Bedienungsanleitung Att CL82351 Bedienungsanleitung Nad T752 Bedienungsanleitung Samsung GT-S5360 Bedienungsanleitung AEG FEE63400PM Bedienungsanleitung